English
HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgaphantsi komhlaba Cabling Umfanekiso Featured
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling
  • HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling

HDPE Duct Tube Bundle Ngqo Ngcwaba ngokuNgqongile Cabling

Inkcazelo emfutshane:

I-HDPE (i-High-density Polyethylene) Uchongo olunemibala yokufakelwa ngokuthe ngqo emhlabeni okanye ukufakwa kwimikhono yokukhusela.Ubuchwephese obuphezuluiimveliso UKUNCIPHISA IINDLEKO, iimeko zokwakha EZULULA, ziphucula ngokubonakalayo ixabiso lemibhobho ekhoyo ephantsi komhlaba umthamo kunye nezibonelelo.


  • Umzekelo:DW-TB

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Ividiyo yeMveliso

    ia_23600000024

    Inkcazo

    Nge-HDPE njengeyona nto iphambili, inokusebenza kakuhle komatshini ukubonelela ngokukhuselwa okwaneleyo kwekhebula.
    Isithambiso esiqinileyo, esisisigxina se-silicon sodonga lwangaphakathi luthoba ngokufanelekileyo i-coefficient yodonga lwangaphakathi ukuze kuxhamle ukuvuthelwa kwentambo yomgama omde.
    Uluhlu lwe-silicon ludityanisiwe eludongeni lwangaphakathi lombhobho, ikhebula kumbhobho inokutsalwa ngokuphindaphindiweyo ngaphandle kokuhluthwa okanye ukuphulwa.

     

    Inqaku lenqaku. Impahla engekasilwa I-Micro duct yangaphakathi Imibhobho yeenyanda Imbonakalo Ebonakalayo Ukutyumza Impembelelo Min.Goba iRadiyosi
    Izinto eziphathekayo Melt Flow Index Ukuxinana Uxinzelelo lokusingqongileyo luyaqhekeka
    ukuchasa (F50)    		 Ububanzi bangaphandle Ukutyeba kweendonga I-Inner Diameter Clearance I-ovality Uxinzelelo Kink Tensile strength Ukuguqulwa kobushushu Co-efficient of Friction Umbala kunye noshicilelo Idayimitha yangaphandle Ubunzima bodonga Uxinzelelo Tensile strength Umbala kunye noshicilelo
    DW-TB0535-DB1 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 10.0mm (± 0.3mm) 2.50mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 650N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha    		 Imbambo ngaphakathi kunye nomphandle ogudileyo wangaphandle, awunamadyungudyungu, umngxuma oshwabeneyo, ukugqabhuka, imikrwelo kunye noburhabaxa. Akukho deformation ishiyekileyo > 15% yedayamitha yangaphakathi nangaphandle, iya kuphumelela uvavanyo lwangaphakathi lokucoceka.
    DW-TB0535-DB2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 15.0mm*10.0mm
    (± 0.3mm)    		 2.50mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1000N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DB4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 18.9mm (± 0.7mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1950N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DB7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 21.8mm (± 1.1mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 2500N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DB12 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 21.8mm (± 1.1mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 3550N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DB19 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 31.8mm (± 1.1mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 4700N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI1 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 8.0mm (± 0.2mm) 1.50mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 380N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 5.0mm ± 0.1mm 0.75mm ± 0.10mm Akukho monakalo kunye nokuvuza ≥ 640N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 15.0mm ± 0.7mm 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1050N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 18.4mm ± 0.7mm 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1500N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    I-DW-TB0535-DI12 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 23.7mm ± 1.1mm 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 2200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI19 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 23.7mm (± 1.1mm) 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 2200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0535-DI24 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 33.4mm (± 1.1mm) 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 4200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0735-2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 5.0mm ± 0.1mm 0.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 50mm ≥ 185N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 16.4mm * 9.4mm (± 0.3mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1020N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0735-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 7.0mm ± 0.1mm 1.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 70mm ≥ 520N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 16.4mm * 9.4mm (± 0.3mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1750N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0735-7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 7.0mm ± 0.1mm 1.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 70mm ≥ 520N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 23.4mm * 21.6mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 2750N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0735-12 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 7.0mm ± 0.1mm 1.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 70mm ≥ 520N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 30.4mm * 27.6mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 4400N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0735-24 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 7.0mm ± 0.1mm 1.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 70mm ≥ 520N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 44.2mm (± 1.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 9000N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB0805-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 7.0mm ± 0.1mm 1.75mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 70mm ≥ 520N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 29.2mm (± 0.5mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 3480N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1006-2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 10.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 100mm ≥ 910N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 22.4mm*12.4mm (± 0.3m) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1600N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1006-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 10.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-3.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 100mm ≥ 910N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 22.4mm*22.4mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 2750N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1006-7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 10.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-4.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 100mm ≥ 910N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 32.4mm*29.8mm (± 0.7mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 4400N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1208-2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-6.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 1200N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 26.4mm*14.4mm (± 0.3mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1950N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1208-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-6.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 1200N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 26.4mm*14.4mm (± 0.3mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 3400N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1208-7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-6.0mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 1200N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 38.4mm*35.2mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 5400N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1210-DB1 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 18.0mm ± 0.3mm 3.00mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥ 1650N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1210-DB2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 30.0mm * 18.0mm (± 0.5mm) 3.00mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥2680N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1210-DI1 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 1.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 15.0mm ± 0.3mm 1.50mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥920N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1210-DI2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 1.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 27.0mm * 15.0mm (± 0.5mm) 1.50mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥1600N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    I-DW-TB1210-DI4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 1.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 32.4mm (± 1.1mm) 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥2850N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1210-DI7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 12.0mm ± 0.1mm 1.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 120mm ≥ 620N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 39.4mm (± 1.1mm) 1.70mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥4200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-1 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 16.4mm ± 0.5mm 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥1400N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-2 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 30.4mm*16.4mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥2250N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-3F I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 44.4mm*16.4mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥3000N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-4F I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 58.4mm*16.4mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥4200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    I-DW-TB1410-4S I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 40.6mm (± 1.1mm) 3.40mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥7200N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 30.4mm*30.4mm (± 0.5mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥4000N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-5F I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 44.4mm*28.6mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥5000N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-6F I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 44.4mm*30.4mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥5850N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1410-7F I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 14.0mm ± 0.1mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 140mm ≥ 1350N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 44.4mm*30.4mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥5850N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1612-4 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 16.0mm ± 0.15mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 176mm ≥ 1600N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 34.4mm*34.4mm (± 1.1mm) 1.20mm ± 0.20mm Akukho monakalo kunye nokuvuza ≥4600N I-Orenji okanye ngokomthengi ngamnye
    iinkcukacha
    DW-TB1612-7 I-100% ye-HDPE enyulu ≤ 0.40 g/10min 0.940～0.958 g/cm3 Min.96h 16.0mm ± 0.15mm 2.00mm ± 0.10mm Ibhola yentsimbi eyi-8.5mm inokuvuthelwa
    ngokukhululekileyo ngomjelo.    		 ≤ 5% Akukho monakalo kunye nokuvuza ≤ 176mm ≥ 1600N ≤ 3% ≤ 0.1 Ngokwengcaciso yomthengi 50.4mm*46.2mm (± 1.1mm)

    imifanekiso

    ia_28200000039
    ia_28200000040
    ia_28200000041
    ia_28200000042
    ia_28200000043
    ia_28200000044

    Isicelo

    Iphuhliswe ukuba ibe sesona sisombululo silungileyo sokungcwatywa ngokuthe ngqo kwemodyuli-ityhubhu zosapho, ezinolwakhiwo olungeyontsimbi.

    Inyanda yeetyhubhu ezincinci okanye ezincinci (ubungakanani bodonga oluqhelekileyo) lungqongwe sisingxobo esinye esicekethekileyo seHDPE.Uyilo lwenza ukuba iindibano zombhobho zilungele ukungcwatywa ngaphandle ngokuthe ngqo okanye ezinye iintambo ezikhoyo okanye iitreyi zentambo.Imibhobho emincinci yenzelwe ukusebenza kakuhle kokuvuthela kwentambo.

    imveliso Testing

    ia_100000036

    Iziqinisekiso

    ia_100000037

    Inkampani yethu

    ia_100000038
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iimveliso ezinxulumeneyo

    Cofa u-enter ukukhangela okanye i-ESC ukuvala